Our services

Monolithic ZirconiaMonolithic zirconia crowns and bridges are milled in one piece from a single disc by CAD/CAM, without veneering porcelain, offering high strength and no chipping risk in the posterior region.View Layered Zirconia (E.max)Layered zirconia combines a CAD/CAM-milled zirconia framework with IPS e.max ceramic applied by hand, layer by layer, preserving the strength of zirconia while achieving natural depth, translucency and a lifelike appearance in the aesthetic zone.View Metal-Ceramic Crown (Laser-Sintered)A metal-ceramic crown with a laser-sintered Cr-Co framework and porcelain veneering: the proven classic, produced digitally for a homogeneous framework without casting defects and with consistent fit.View Veneers (E.max / Empress)Veneers are thin ceramic shells bonded adhesively to the tooth surface. Made from IPS e.max lithium disilicate or IPS Empress, they deliver natural translucency with minimal tooth reduction.View

Digital Implant ZirconiaDigital implant zirconia covers metal-free zirconia crowns and bridges designed on implant libraries from scan-body data and produced, depending on the clinical situation, as screw-retained or cement-retained restorations.View Screw-Retained Implant Crown (Laser)A screw-retained implant crown with a laser-sintered Cr-Co framework and porcelain veneering, screwed directly onto the implant: retrievable for maintenance and free of the risk of subgingival cement residue.View Toronto Bridge (Hybrid Denture)A Toronto bridge is a screw-retained hybrid prosthesis for the edentulous jaw, carrying denture teeth and pink gingiva on a rigid framework. We design it digitally and produce passive-fit frameworks by laser sintering or CAD/CAM milling.View Implant Bar OverdentureA bar overdenture is a removable implant-supported denture that clips onto a bar splinting the implants. We design the bar digitally from the tooth set-up and produce it in Cr-Co or titanium.View

Mock-up / Smile DesignWith mock-up and smile design, the planned aesthetic restoration is designed digitally first and then tried in the mouth of your patient. The approved design becomes the reference for preparation, provisionals and final work.View Premill Custom AbutmentA premill custom abutment is milled from a titanium blank with a prefabricated implant connection, with a patient-specific emergence profile and angulation. It keeps the precision of the connection while shaping soft tissue and margin to the case.View 3D-Printed Provisionals3D-printed provisionals are digitally designed temporary crowns and bridges printed from resin. Because they carry the form of the final restoration, your patient wears a provisional close to the planned result while the definitive work is made.View PMMA ProvisionalsPMMA provisionals are temporary crowns and bridges CAD/CAM-milled from industrially polymerised PMMA discs. Their strength and colour stability make them suitable for long-term provisionals, implant provisionals and try-in prostheses.View